The planetary reducer manufacturer's analysis of the advantages of the reducer assembly and installation device is as follows.
1. The end of the gear reducer assembly loading device is connected with the drive roller shaft head, and the pressure is directly applied to the drive roller shaft. The other end of the loading device is pressed on the end face of the gear reducer hole through the baffle, and the pressure is uniform, producing no damage pressure on the gear reducer body.
2. After the thrust bearing is added to the installation device, the friction between the handwheel sleeve and the baffle is eliminated, so that the handwheel can rotate freely and the rotation and pressing are more labor-saving.
3. The handwheel sleeve installed in the device can allow two people to operate at the same time. Because the lever arm is long, it saves the operator's physical strength and reduces the labor intensity according to the lever principle.
4. When the loading device is pressed in, the force is evenly distributed, and the pressure is transferred to the baffle through the handwheel, and along the axis direction of the drive roller, which is not easy to produce deflection, making the assembly easier.
5. The loading device makes use of the screw transmission between the screw and the handwheel to make the power transmission simple. And the screw is coated with lubricating oil, which can save labor and prolong the service life of the screw.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
