Views: 1 Author: WeiGao Transmission Publish Time: 2021-09-28 Origin: WeiGao Transmission
Cycloid pinwheel reducer is an important part of the reducer. Generally speaking, the reducer device may have fault factors. One of them is that the cycloid pinwheel reducer device is heating. What methods should we take to solve this? If no measures are taken, what effects may be caused to the reducer?
If it is found that the cycloid pin gear reducer has high overheating and temperature rise when in use, it can be roughly divided into the following possibilities.
1. The bearing of cycloid pin gear reducer is cheap, which is the influencing factor and abnormal condition.
2. The above is a common possibility. It may also be that the cycloid pinwheel reducer is relatively new and there are some problems during assembly. In the face of these situations, we need to have such an idea in our mind according to previous experience after the device temperature of the cycloid pinwheel reducer is abnormal, but we also need to distinguish according to the actual situation.
3. Compared with the overheating of cycloid pin gear reducer, such factors also need to be considered, including whether there are abnormalities in lubrication and insufficient lubricating oil, which may lead to various abnormalities. Analyze them one by one and review them carefully.
4. Naturally, there are some factors that need to be thought of. If the cycloidal pinwheel reducer is overloaded, it is also possible for the temperature to become higher.
For the above reasons, we also need to constantly analyze and study, and gradually find out the answer of * * * end. If the temperature of cycloidal pinwheel reducer is relatively high, it will test our mastery of some knowledge points of reducer, including theoretical factors, practical factors, etc.
According to the above steps, it is not difficult to find the problem through previous experience, data analysis and sound discrimination.