Views: 1 Author: WGT Publish Time: 2021-11-30 Origin: WGT
Cycloid pin gear reducers are usually called planetary cycloid reducers because they adopt the principles of cycloid pin tooth meshing and planetary transmission. As a driving or deceleration device in mining, metallurgy, construction, power generation and other industries.
The application conditions are as follows.
1. The output shaft of cycloidal pinwheel reducer cannot bear large axial force or radial force. If the axial or radial force is large, other methods shall be used.
2. The reducer is allowed to be used in the continuous operating system and to operate in both forward and reverse directions.
3. The additional speed of input shaft is 1500pm. If the input and output exceeds 18.5kw, it is recommended to use a 960rpm 6-pole motor.
4. The working direction of cycloidal pinwheel reducer of horizontal device is horizontal. The horizontal inclination angle during installation is usually less than 15 °. If more than 15 °, other methods should be used to ensure sufficient smoothness and avoid oil leakage.