The function of the servo motor is to convert the input voltage signal into the angular velocity or angular displacement output on the shaft. It is often used as an execution component in automatic control systems, so the servo motor is also called an execution motor. Its maximum The advantage is: the rotor rotates immediately when there is control voltage, and stops immediately when there is no control voltage.The angle and speed of the shaft are determined by the angle and size of the control voltage.AC servo motors are divided into AC and DC.
1. DC servo motor
1. Basic structure
The traditional DC servo motor is an ordinary small-volume DC brushless motor. The three-stage gear reducer has two types: separately excited type and claw pole type. Its structure is basically the same as that of a general DC motor.
The rotor of cup-type synchronous motor DC servo motor is made of carbon-free hollow cup-shaped cylinder, which is light in weight, has small inertia moment and fast response.The rotor rotates between the inner and outer motor stators made of ferromagnetic materials, and the magnetic density is large.
Brushed DC servo motors use electronic commutation devices to replace traditional carbon brushes and motor rotors, and the gear reducer speed ratio makes their work more reliable.The structure of the motor's stator transformer core is basically the same as that of a general brushless DC motor. It has multi-component windings and the rotor is made of permanent ferrite.
2.Basic principles
The main principle of the traditional DC servo motor is exactly the same as that of the general DC motor. The hard-surface gear reducer uses the function of the synchronous motor current and magnetic flux to generate electromagnetic induction torque to rotate the servo motor.Generally, the synchronous motor control method is used, that is, under the condition that the voltage of the excitation regulator does not change.
The stator core is generally made of silicon steel sheets.Two-phase windings are embedded in the slots on the surface of the stator core. One of the phase windings is the excitation regulator winding, and the other phase winding is the control winding. The two-phase windings are 90° offset from each other in the spatial position.When working, the excitation regulator winding f is connected to the AC excitation regulator power supply, and the control winding k adds the control signal voltage Uk.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
