GYFTCY(ADSS)-132B 132-core single-mode all-dielectric self-supporting optical cable

---【Features】

GYFTCY all-dielectric self-supporting optical cable (ADSS)

Outdoor all-dielectric self-supporting optical fiber cable for communication with non-metallic strengthening member, loose-tube layer-twisted filling type, and polyethylene outer sheath

●Select high-quality optical fiber to ensure that the optical cable has excellent transmission performance

●Precisely control the excess length of the optical fiber to ensure that the optical cable has excellent mechanical and temperature characteristics

●Strict process and raw material control to ensure the stable operation of the optical cable for more than 30 years

●Full cross-section water-blocking structure to ensure good water-blocking and moisture-proof performance

The loose tube is filled with special ointment for critical protection of the optical fiber

●The central reinforcement member adopts glass fiber reinforced plastic rod (FRP) with high Young's modulus

●Full dielectric self-supporting, high tensile strength aramid yarn or glass yarn reinforcement ensures that the optical cable is self-supporting and the optical fiber has no strain in harsh environments and is not affected by lightning induction

●Excellent performance polyethylene/tracking-resistant outer sheath to ensure the safety of the optical cable in the environment of high induced potential

---【Performance】

●Outer diameter: according to the actual application conditions (such as: span, geographical environment, meteorological conditions, etc.) and erection conditions

●Weight: according to the actual application conditions (such as: span, geographical environment, meteorological conditions, etc.) and erection conditions

●Scope of application: communication lines erected by power poles and towers

●Laying method: self-supporting overhead

●Working temperature: -40~ +70°C

Note: 1. The technical parameters of ADSS optical cable are closely related to the number of cores, span, weather conditions and sag requirements, and specific design is required for each actual project; .

2. Determine whether to use the tracking-resistant AT outer sheath according to the voltage level and the suspension point requirements of the tower;

3. The maximum installation span of the optical cable can reach 1200m.