RV-20E and 40E have two planetary gears. Please pay special attention when assembling the input gear.The input gear should be inserted straight in.
If the phase with the planetary gear does not match, please slightly change the angle in the circumferential direction and make sure that the motor flange surface is not tilted and is in close contact.It is strictly forbidden to screw in bolts, etc.If the flange surface is tilted, it may cause the state shown in Figure 12 below left.
RV-6E, 20E, 40E reducer technical requirements:
Appearance quality mark: The appearance of the reducer should be neat and beautiful, with clear and correct markings.There should be no obvious defects such as bumps, scratches, burrs, pits and rust on the surface of the reducer bar. The fastener connection should be firm, the pins should be tight, and the seal should be reliable.The handwriting of the mark should be clear and correct. After testing under specified environmental conditions, the mark and handwriting should still be clearly visible. The reducer should have reliable anti-rust measures.
The basic dimensions, Dimensions of the reducer, and the installation dimensions should comply with the drawings or assessment requirements of P09-919 and P20-P27 and be confirmed by the customer.The input gear shaft, mounting flange, etc. can be produced according to customer requirements. The relevant drawings should be confirmed by the customer before production.
When the reducer operates without load when the input speed is <3000r/min, its noise should be less than 70+3dB(A)
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
