Two-stage cylindrical gearbox 1TS2U-200
Product Description
---Product introduction
Cylindrical two-stage gearbox 1Ts2U-200 with gear ratios up to 40 and torque up to 2500 Nm in constant mode.It is used to drive general machine building equipment from electric motors that rotate at speeds up to 1800 rpm.Efficiency - 95-97%, regardless of direction of rotation.The weight in the cast iron crankcase is 170 kg.The center distance is 200mm.Fitting options are specified and the input and output shafts are released in the correct orientation prior to ordering.The gear ratio and diameter of the shaft are also specified.Mounting - Bolted onto a flat surface.Change the oil every 1000 hours of operation.
---Technical Parameters
The type of gear pair is a two-stage cylindrical transmission.
The axis alignment of the shafts in space is parallel.
Gear ratios - 8; 10; 12.5; 16; 20; 25; 31.5;40.
Center distance - 200 mm.
Mounting method - claws with through holes.
The input shaft type is cylindrical or tapered.
The output shaft types are cylindrical, tapered and hollow.
Rated speed of the output shaft - not to exceed 1500 rpm.
Rated torque on low speed shaft - 5000 Nm.
Climatic conditions of operation - U, O, UHL, T.
Overall Dimensions (LxHxW) - 678x243x425 mm.
The weight of the gearbox without oil is 170 kg.