Two-stage cylindrical gearbox 1TS2U-250
Product Description
---Product introduction
Powerful helical gear reducer with a maximum torque of 5000 Nm in constant mode and 10000 Nm in cycle mode with a run/idle ratio of 15/85%.Designed according to the classic scheme with parallel axes and crankcase with cover.It is used to drive metallurgy, lifting and crushing and other equipment that requires high power.Helical gear units provide the highest possible efficiency.The 1TSU-250 is 97% efficient, so it heats up very little during operation.The service life is more than 10 hours, and the maintenance is passed in time.The cast iron crankcase weighs 310 kg.
---Technical Parameters
The type of gear pair is a two-stage cylindrical transmission.
The axis alignment of the shafts in space is parallel.
Gear ratios - 8; 10; 12.5; 16; 20; 25; 31.5;40.
Center distance - 250 mm.
Mounting method - with through holes.
The input shaft type is cylindrical or tapered.
The output shaft types are cylindrical, tapered and hollow.
Rated speed of the output shaft - not to exceed 1500 rpm.
Rated torque on low speed shaft - 5000 Nm.
Climatic conditions of operation - U, O, UHL, T.
Overall Dimensions (LxHxW) - 829x290x530 mm.
The weight of the gearbox without oil is 310 kg.