How to determine whether the lubricating oil volume of BWY12-17-2.2KW cycloid pin wheel reducer is reasonable

Check oil level marks : Most cycloid pin wheel speed reduction opportunities have oil windows or oil rulers. The oil level should be kept between the highest oil level line (MAX) and the lowest oil level line (MIN). It can also be followed by some empirical standards, such as allowing the lubricant to cover 1/4-1/3 of the large gear, so as to ensure that the gear is equipped with an appropriate amount of oil to lubricate when it rotates.

Reference Manual Data : Follow the recommendations in the user manual or technical documentation provided by the reducer manufacturer. These data usually give the required oil level range or specific oil volume for this model reducer.

Calculate the internal volume : Generally speaking, the fuel refueling volume of the cycloid pin wheel reducer is 1/3-1/2 of its internal volume. It is possible to roughly determine whether the lubricant amount is reasonable by estimating the size of the internal space of the reducer, but this method is not accurate enough.

Observe operating conditions : During the operation of the reducer, pay attention to oil temperature, noise and vibration. If the amount of lubricating oil is insufficient, the oil temperature may be too high due to poor lubrication, and abnormal noise and vibration may occur; if the amount of oil is too high, stirring heat will be generated inside the reducer, which may also lead to problems such as rising oil temperature and oil leakage in the oil seal.

Check the lubrication effect : After shutdown, open the reducer observation hole or disassemble the relevant parts to check the surface lubrication of gears, bearings and other components. If there is a uniform oil film on the surface, it means that the amount of lubricating oil and lubrication effect are good; if there are dryness or wear marks, it may be that the amount of oil or poor lubrication is insufficient. However, this method is relatively complex and may require professional operation. It is generally used when regular maintenance or problems arise.