Inspection and precautions for oil quality of planetary reducer

Since the special oil for the planetary reducer may deteriorate after the equipment has been in operation for a long time, which will seriously affect the use of the equipment, and more seriously, it may cause damage to the equipment and reduce the use efficiency. Therefore, we should treat the oil according to the requirements of the planetary reducer The oil quality of the equipment is checked regularly to ensure the normal use of the equipment.

In fact, the use effect of the planetary reducer has a lot to do with its oil quality. You must not ignore the inspection of the oil quality during use.

So, how should the oil of the planetary reducer be checked?The following Bapman Industrial Technology details its specific methods:

1. The lubricating grease of the reducer will be mildewed due to various reasons within a period of time after use, so the lubricating grease should be checked every quarter;

2. When checking the oil, first disconnect the switching power supply, wait for the reducer to turn on after water cooling, and place a non-porous oil receiving plate under the oil filling foot of the reducer, then open the oil level oil foot bolt and add some oil Add some oil to the foot bolts and ventilator, and then wait for the compressor lubricating oil to be completely discharged before reinstalling the oil and oil foot bolts and adding new grease;

3. After the lubricating oil of the compressor exceeds the specified amount according to the oil quantity bolts, tighten the oil quantity bolts and the ventilator;

4. Check whether the oil sample taken on the reducer is turbid oil. If it is, the lubricating oil on the reducer needs to be replaced immediately; the poor quality of the lubricating oil will naturally affect the actual effect of the reducer operation. To maintain the condition of the lubricating oil of the reducer, the reducer cleaning and maintenance machine adopts the original oil supply and drainage system software of the reducer, and timely checks the operation of the reducer, and timely disassembles and adjusts.

Inspection items for oil quality of planetary reducer

1. Cut off the power supply, wait for the planetary reducer to cool down, put the oil pan under the oil drain bolt, open the oil level bolt, the oil drain bolt and the ventilation valve start to drain the oil, wait until all the oil is discharged, reinstall the oil drain bolt, and then inject new of lubricating oil.

2. The brand and type of lubricating oil to be replaced should be consistent with the original lubricating oil, oil quantity and installation position. After the oil level bolts observe that the oil reaches the specified value, tighten the oil level bolts and breather.