Planetary cycloid reducer

Brief introduction of planetary cycloid reducer

The entire transmission device of the planetary cycloid reducer can be divided into three parts: input part, deceleration part and output part; according to the structural form, it can be divided into four types: horizontal type, vertical type, direct connection type and double shaft type.

1. Large transmission ratio.One-level, two-level, three-level and more combinations can be adopted as required.
2. High transmission efficiency.Since the meshing part of the machine adopts rolling meshing, the average efficiency can reach more than 90%.
3. Few faults, long life.The main transmission meshing parts are made of bearing steel grinding, so the mechanical properties and wear resistance are good, and because of rolling friction, there are few failures and long life.
4. The operation is stable and reliable.Due to the multi-teeth meshing in the transmission process, it makes it run smoothly and reliably with low noise.
5. Easy disassembly and assembly: easy maintenance.
6. Strong overload capacity.Impact resistance, small moment of inertia, suitable for frequent starting and forward and reverse operation.

Application range

Military industry, aerospace, metallurgy, mining, petroleum, chemical industry, shipbuilding, light industry, food, textile, printing and dyeing, pharmaceutical, rubber, plastic, and lifting transportation, etc.

Planetary cycloid reducer

Model: 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw... (consult for details)
Power: 380v (three-phase), 220v (single-phase), anti-exposure motor, anti-static, frequency conversion, etc.
Speed ​​regulation mode: speed regulation, non-speed regulation motor
Speed ​​mode: fixed, the speed is selected according to the customer's mixing purpose
Color: optional according to customer needs
Weight: According to selected or customized models
Packing: wooden box

Product advantages

High speed ratio: The maximum speed ratio of the primary transmission is 87; the maximum speed ratio of the secondary transmission is 7569, and more transmission stages can be used as required

Compact structure and small size: The input shaft and the output shaft are on the same axis, so the structure is compact and the volume is small.

Easy disassembly and maintenance: Reasonable structural design, simple disassembly and assembly, and easy maintenance.

Smooth operation and low noise: The cycloidal needle has a large number of meshing teeth, a large overlapping coefficient, and a mechanism of stable parts, so that the vibration and noise are controlled to a small degree.

Reliable use and long life The main transmission meshing parts are made of bearing steel, which has good mechanical properties, smooth rolling friction, and is more durable and has a long service life.

Strong overload capacity, impact resistance, small moment of inertia The number of meshing teeth is more than 3 times that of conventional involute gears. It has strong overload resistance and adopts a unique arc tooth shape without broken teeth.

Model and parameters

Machine model and transmission ratio

Note:1. According to the structural form, it is divided into: horizontal type and vertical type; according to the drive connection mode, it is divided into: double-axis type, motor connection type, and motor direct connection type.
2. Where the transmission ratio of the first-stage model, the second-stage and third-stage models can be combined arbitrarily.

Model comparison table

Note:The corresponding machine models of different standards have basically the same performance indicators, but the appearance, installation and connection dimensions are slightly different.Users try to use JB/T2982-94A and B standards first.

Model representation method