Sealing requirements of hard tooth surface gear reducer

The hard tooth surface gear reducer is mainly a type of reducer produced according to the national standard, and is mainly used for the transmission device with the output shaft arranged in the vertical direction.In industrial production, hard tooth surface gear reducers are mainly used for belt conveyors and various transportation machinery, and can also be used for transmission machinery of various general machinery such as coal, metallurgy, chemical industry, building materials, light industry, petroleum, etc. middle.

Sealing requirements and functions of hard tooth surface reducer:

1. No gaskets are allowed to be filled between the split surfaces of the box body of the hard tooth surface reducer, but sealant or water glass can be applied to ensure the seal.

2. When assembling the reducer, before tightening the box bolts, use a 0.05mm feeler gauge to check the tightness between the hard-toothed reducer case cover and the joint surface of the box seat.

3. The shaft extension seal should be coated with grease, and the seals of the hard tooth surface reducer should be assembled in strict accordance with the requirements.Only when the sealing of the hard tooth surface reducer is done well can it ensure its smooth operation, prevent the oil leakage of the reducer, effectively improve the production efficiency of the reducer, and bring us more benefits.

If you have any questions or business needs about the reducer, you can consult us, and we will serve you wholeheartedly.