WG-C357-S3S5-SFPLC.S20 Network managed plug-in card 100M SFPLC single fiber bidirectional transmission optical fiber transceiver independent 20km
Product Description
SFP type network managed optical fiber transceiver series-CN.pdf
SFP type network management fiber optic transceiver series-EN.pdf
WG-C357-S3S5-SFPLC network management型Detached100兆SFPLC single fiber bidirectional transmissionFiber Transceiver
Product introduction:
WG-C357-S3S5-SFPLC.SXX series products are 10/100M centralized network managed optical fiber transceivers independently developed and produced by our company.It is a plug-in card-type 1 optical and 1 electrical product that can be installed in a 1-slot independent chassis to achieve photoelectric conversion between 10/100Base-T(X) electrical signals and 100Base-X optical signals.Supports various speeds, single-mode/multi-mode, single-fiber/dual-fiber.The network management interface function of this device is comprehensive and simple to set up. It supports network management methods such as SNMP, WEB firmware upgrade, CONSOLE and TELNET, and can realize centralized remote management of multi-service cards on a unified remote platform.
Product features: remote network management
Using high-performance chips to achieve non-blocking transmission and switching performance, ensuring higher security and stability of data transmission
* The electrical port supports 10/100M, full/half duplex adaptive/forced functions
* The electrical port supports MDI/MDIX automatic identification
* Support SFP single-core LC optical module (meeting DMI (Diagnostic Monitoring Interface) function)
* Supports 1310/1550nm and DWDM/CWDM wavelengths specified by ITUT
* Store-and-forward mode supports packet length 2K bytes, pass-through mode supports 9k Jumbo frames
* Support port bandwidth control function, the step size is 64Kbps
* Supports link line-speed loopback test (Loopback) to facilitate line debugging
* Supports failover (LFP) function, which can quickly locate the failed link
* Support remote power failure alarm
* Economical inband management function, supporting 802.3ah and TS1000
* Powerful centralized management function: supports network management protocol SNMP network management mode
* Support hot swap
* Simple installation, complete status indicators, and working status is clear at a glance
* Supports use in 1-slot independent chassis.The independent desktop computer has a built-in professional communication power supply.
Electrical interface:1 10/100M adaptive interface, RJ45; compatible with IEEE802.3, IEEE802.3u, IEEE802.3z
Automatic IdentificationMDI/MDI-X; full/half duplex; 100m transmission distance
Optical port:1 SFP single-core LC; wavelength 1310nm/1550nm, transmission distance 20KM~120KM
powered by:5VDC Card mode: central office rack; independent: built-in AC 220V or DC -48V;
Power Supply: Card Dimensions:100mm(L)*70mm(W)*26mm(H);Single size: 155mm(L)*127mm(W)*31mm(H)
Operating temperature:-20º~70℃ Relative humidity: 5%-95%
Applicable industries:
Metropolitan fiber optic broadband network: suitable for data network operators such as China Telecom, Radio and Television, China Unicom, and China Railcom;
Optical fiber network engineering network: suitable for private networks in finance, government, petroleum, railway, electric power, public security, transportation, education and other industries.