What impact will the parallelism error have when installing the ZSY710-80-IV reducer?

The parallelism error when installing the ZSY710-80-IV reducer will directly affect the transmission stability, component life and operating efficiency. The core impact is concentrated in the following aspects:

1. Increased wear and damage of transmission components

1. Abnormal gear meshing: Deviation in parallelism will lead to uneven contact between the gear tooth surfaces, concentrated local stress, accelerated tooth surface wear, pitting corrosion, and even broken teeth in severe cases.

2. Coupling damage: If a coupling is used for connection, the deviation will cause the coupling to bear additional radial force and bending moment, leading to aging and cracking of the elastomer, deformation of the metal coupling, or loosening of the bolts.

3. Bearing failure: The reducer and motor bearings will cause eccentric wear due to unbalanced loads, increase the temperature, intensify abnormal noise, and shorten the service life of the bearings.

2. Cause vibration and noise

1. Amplification of running vibration: Parallelism error causes the force imbalance of the transmission system, causing periodic vibration during operation. The greater the deviation, the more severe the vibration.

2. Significant increase in noise: Poor gear meshing and abnormal bearing stress will be accompanied by harsh meshing noise or abnormal bearing noise, affecting the on-site working environment.

3. Reduce transmission efficiency and energy consumption

1. Increased energy loss: Poor tooth surface contact and increased component friction will cause part of the power to be converted into heat energy or friction loss, and the transmission efficiency will decrease.

1. Increased energy consumption: In order to maintain the rated output power, the motor needs to overcome additional resistance caused by deviation, and power consumption increases.

4. Cause equipment failure to shut down

1. Long-term out-of-tolerance operation will accumulate wear and vibration problems, leading to serious failures such as coupling breakage, gear chipping, and bearing jamming.

2. Sudden failures may interrupt production and increase maintenance costs and downtime losses.