Article List

• What requirements should reducer installation meet

  What requirements should the reducer be installed to meet?(1) the position deviation between the reducer center line and the reference center line shall not exceed 3 mm.(2) the fixation of equipment feet is usually carried out by welding with embedded parts, and the welding height shall be equal to

  October 25, 2019
• Flat envelope reducers are widely used and have strong durability

  The planar envelope reducer can exert many advantages and characteristics during use, and the current application range is very wide, so the advantages of use are recognized by everyone.The durability is relatively strong and can achieve a long service life.Of course, the premise is to ensure that the manufacturer purchases, and also needs to use the correct method, which will bring better use advantages.

  November 02, 2019
• The principle and characteristics of planetary reducer

  Choosing high-quality planetary gear reducer materials will help improve its load-bearing capacity and service life.Considering the structural characteristics of the Galaxy reducer and the load characteristics of the gears, hardened gears should be widely used.There are many heat treatment methods

  September 08, 2020
• Principle and characteristics of planetary reducer

  Choosing a good planetary gear reducer material will help improve its bearing capacity and service life. In view of the structural characteristics of the Galaxy reducer and the load characteristics of the gear, hardened gears should be widely used. There are many heat treatment methods to obtain

  September 08, 2020
• How to divide the 'level' of the reducer?

  Twelve precision grades are specified, followed by numbers 1, 2, 3, ... 12 representing the precision grades from high to low, the most commonly used are 5 to 9 precision grades.In addition, according to the requirements of motion precision, the transmission is stable

  November 12, 2019
• How is the "grade" of the reducer gear divided?

  Twelve precision levels are specified, which are sequentially represented by numbers 1, 2, 3, ... 12 in order of accuracy from high to low, and most commonly used are 5 to 9 levels of precision. In addition, according to the requirements of the accuracy of the motion, the smoothness of the transmiss

  November 12, 2019
• Introduction and installation points of worm gear screw jack

  The worm gear screw jack is a very basic component, which has the advantages of compact structure, small size, light weight, high power and low noise.

  November 09, 2019
• Surface treatment process of planetary gear reducer

  Choosing high-quality planetary gear reducer materials will help improve its load-bearing capacity and service life.Considering the structural characteristics of the Galaxy reducer and the load characteristics of g, choosing high-quality planetary gear reducer materials will help to improve its load-bearing capacity and service life.

  September 28, 2019
• Features of hardened cylindrical gear reducer

  Weigao hard tooth surface cylindrical gear reducer is produced according to the national standard JBT8853-2001.Mainly used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing and dyeing, pharmaceutical and other fields.

  April 29, 2020
• Oil leakage of steam turbine reducer, analysis of the cause of oil leakage

  Weigao worm gear reducer is a kind of transmission machinery with compact structure, large transmission ratio and self-locking function under certain conditions.It is one of the commonly used reducing agents.Among them, Xinghe hollow shaft worm gear reducer not only has the above characteristics, but also is easy to install and has a reasonable structure, and has been more and more widely used.

  September 28, 2019