Article List

• Introduction to Fujian Sangang (Group) Co., Ltd.

  Fujian Sangang (Group) Co., Ltd. (hereinafter referred to as Sangang Group), formerly known as Fujian Sanming Iron and Steel Works, was established in 1958.In March 2000, Fujian Provincial People's Government approved the establishment of Fujian Sangang Group Corporation.Fujian Sangang (Group) Co., Ltd.

  Global case September 15, 2020
• Brief Introduction of Fujian Sangang (Group) Co., Ltd.

  Fujian Sansteel (Group) Co., Ltd. (hereinafter referred to as Sansteel Group) was formerly known as the Sanming Iron and Steel Plant of Fujian Province and was established in 1958. In March 2000, the Fujian Provincial People's Government approved the establishment of Fujian Sansteel (Group) Co., Ltd

  Global case September 15, 2020
• China National Materials Group Co., Ltd. uses Hangzhou Weigao reducer in warehouse

  China National Materials Group Co., Ltd. (abbreviated as: Sinoma Group) was established in 1983. It is a central enterprise directly managed by the State-owned Assets Supervision and Administration Commission of the State Council. It is my country’s non-metallic materials industry with a series of c

  Global case October 15, 2012
• China Sinoma Group Co., Ltd. uses Hangzhou Weigao reducer in the warehouse

  China Materials Group Co., Ltd. (abbreviation: Sinoma Group) was established in 1983 and is a central enterprise directly managed by the State-owned Assets Supervision and Administration Commission of the State Council.This is my country's non-metallic material industry, with a series of

  Global case October 15, 2012
• Design principle of reducer

  The gear is a very important accessory of the whole reducer.During operation of the equipment, the cogs and cogs are effectively interlocked.Therefore, in order to use the equipment effectively, each accessory must be properly designed.Especially the gears.However, the following principles should also be followed when designing

  October 17, 2019
• How to solve the oil leakage problem of reducer

  After using the reducer for a long time, a comprehensive inspection should be carried out so that some hidden dangers can be found in time.In order to keep the equipment running efficiently, we usually refuel in time.But we should also solve the oil spill problem in time.

  October 14, 2019
• How to improve the heat dissipation efficiency of the reducer

  The electric drum is a new type of driving device, which places the motor and reducer inside the drum body.The reducer is mainly used in fixed and mobile belt conveyors, instead of the traditional motor, it is an independent drive device for driving the outside of the pulley.

  October 23, 2019
• Output speed of reducer

  Whenever it is necessary to control the speed of the equipment, the help of the reducer is needed, because the equipment can realize the function of controlling the speed.The following is an introduction about its output speed.By knowing the output speed, the efficiency can be improved.

  October 25, 2019
• Mineral processing equipment, mining equipment equipped with Weigao reducer,

  The motor drives the barrel of the mill to rotate at an appropriate speed through the transmission and reduction of the gear pair.Under the action of centrifugal force, friction force and gravity, the grinding medium in the barrel is lifted to a certain height, and then thrown or dropped.When the state drops, the material in the cylinder will be crushed by the impact of the medium, and at the same time, due to the rolling or sliding of the medium, the material will also be crushed and ground.The ground material is discharged through the discharge port.According to the needs, the mill can be equipped with air clutch, slow drive device, jacking device, spray lubrication device, etc.The main bearing of the ball mill can use ordinary sliding bearings, dynamic and static pressure bearings, hydrostatic pressure bearings and rolling bearings as required.

  Global case October 29, 2019
• Mineral processing equipment, mining equipment is equipped with Weigao reducer,

  The motor drives the barrel of the mill to rotate at an appropriate speed through the transmission and deceleration of the gear pair. Under the action of centrifugal force, friction and gravity, the grinding medium in the barrel is lifted to a certain height and then throws or falls. When the state falls, the material in the cylinder is crushed by the impact of the medium, and at the same time, due to the rolling or sliding of the medium, the material is crushed and ground. The ground material is discharged through the discharge port. According to needs, the mill can be equipped with air clutch, slow drive device, jacking device, jet lubrication device, etc. The main bearing of the ball mill can adopt ordinary sliding bearings, dynamic and static pressure bearings, static pressure bearings, and rolling bearings according to needs.

  Global case October 29, 2019