Comparing the performance advantages of MBY500-4.5-2 hard-tooth surface gear reducer and MBY450-5.6 reducer

MBY500-4.5-2 and MBY450-5.6 hard-tooth surface gear reducers both have common advantages such as hard-tooth surface and high-precision, but there are differences in specific performance. The following is a comparison of the performance advantages of the two:

• Load-bearing capacity : Generally speaking, the larger the reducer model, the stronger its load-bearing capacity. The center distance of MBY500-4.5-2 is 500mm, and the center distance of MBY450-5.6 is 450mm, so the load-bearing capacity of MBY500-4.5-2 is relatively large, can withstand greater input power and output torque, and is more suitable for working conditions with larger loads.

• Transmission ratio : The transmission ratio of MBY500-4.5-2 is 4.5, and the transmission ratio of MBY450-5.6 is 5.6. MBY500-4.5-2 When the input speed is the same, the output speed will be higher than that of MBY450-5.6, which is more suitable for equipment with certain requirements for output speed; while MBY450-5.6 can provide greater speed reduction and torque increase, suitable for occasions where low speed and large torque are required.

• Volume and Weight : The overall size and weight of MBY500-4.5-2 is larger than that of MBY450-5.6. MBY450-5.6 It has better adaptability and may be relatively more convenient to install and maintain when there is limited installation space or strict limit on the overall weight of the equipment.

• Gear accuracy and transmission efficiency : Both gear accuracy reaches level 6 (GB10095) or above, and both adopt a single-stage reduction design. The comprehensive transmission efficiency of each gear is relatively high, reaching about 0.98. However, because the gear size of MBY500-4.5-2 is relatively large, the contact strength and wear resistance of its gears may be better if the manufacturing process and materials are the same.