Article List

• Mineral processing equipment, mining equipment equipped with Weigao reducer,

  The motor drives the barrel of the mill to rotate at an appropriate speed through the transmission and reduction of the gear pair.Under the action of centrifugal force, friction force and gravity, the grinding medium in the barrel is lifted to a certain height, and then thrown or dropped.When the state drops, the material in the cylinder will be crushed by the impact of the medium, and at the same time, due to the rolling or sliding of the medium, the material will also be crushed and ground.The ground material is discharged through the discharge port.According to the needs, the mill can be equipped with air clutch, slow drive device, jacking device, spray lubrication device, etc.The main bearing of the ball mill can use ordinary sliding bearings, dynamic and static pressure bearings, hydrostatic pressure bearings and rolling bearings as required.

  Global case October 29, 2019
• Mineral processing equipment, mining equipment is equipped with Weigao reducer,

  The motor drives the barrel of the mill to rotate at an appropriate speed through the transmission and deceleration of the gear pair. Under the action of centrifugal force, friction and gravity, the grinding medium in the barrel is lifted to a certain height and then throws or falls. When the state falls, the material in the cylinder is crushed by the impact of the medium, and at the same time, due to the rolling or sliding of the medium, the material is crushed and ground. The ground material is discharged through the discharge port. According to needs, the mill can be equipped with air clutch, slow drive device, jacking device, jet lubrication device, etc. The main bearing of the ball mill can adopt ordinary sliding bearings, dynamic and static pressure bearings, static pressure bearings, and rolling bearings according to needs.

  Global case October 29, 2019
• Introduction to WP reducer

  WP reducer is also called WP reducer, which is divided into standard WPS series, standard WPD series, standard WPA, WPO.WPDA.WPDO, WPDS, WPDS and so on.WP worm gear reducer is developed on the basis of WD reducer.The worm is made of 45# high quality steel and heat treated.The worm gear is made of tin bronze, which has good wear resistance, especially in terms of load-carrying capacity.The worm gear reducer is mainly suitable for the reduction transmission of various mechanical equipment, such as plastics, metallurgy, beverage, mining, lifting transportation, chemical industry, etc.

  October 29, 2019
• What requirements should the installation of the reducer meet?

  What requirements should the installation of the reducer meet?(1) The positional deviation between the centerline of the reducer and the reference centerline should not exceed 3 mm.(2) The fixing of the equipment feet is usually carried out by welding with embedded parts, and the welding height should be equal to

  October 25, 2019
• What requirements should reducer installation meet

  What requirements should the reducer be installed to meet?(1) the position deviation between the reducer center line and the reference center line shall not exceed 3 mm.(2) the fixation of equipment feet is usually carried out by welding with embedded parts, and the welding height shall be equal to

  October 25, 2019
• Flat envelope reducers are widely used and have strong durability

  The planar envelope reducer can exert many advantages and characteristics during use, and the current application range is very wide, so the advantages of use are recognized by everyone.The durability is relatively strong and can achieve a long service life.Of course, the premise is to ensure that the manufacturer purchases, and also needs to use the correct method, which will bring better use advantages.

  November 02, 2019
• The principle and characteristics of planetary reducer

  Choosing high-quality planetary gear reducer materials will help improve its load-bearing capacity and service life.Considering the structural characteristics of the Galaxy reducer and the load characteristics of the gears, hardened gears should be widely used.There are many heat treatment methods

  September 08, 2020
• Principle and characteristics of planetary reducer

  Choosing a good planetary gear reducer material will help improve its bearing capacity and service life. In view of the structural characteristics of the Galaxy reducer and the load characteristics of the gear, hardened gears should be widely used. There are many heat treatment methods to obtain

  September 08, 2020
• How to divide the 'level' of the reducer?

  Twelve precision grades are specified, followed by numbers 1, 2, 3, ... 12 representing the precision grades from high to low, the most commonly used are 5 to 9 precision grades.In addition, according to the requirements of motion precision, the transmission is stable

  November 12, 2019
• How is the "grade" of the reducer gear divided?

  Twelve precision levels are specified, which are sequentially represented by numbers 1, 2, 3, ... 12 in order of accuracy from high to low, and most commonly used are 5 to 9 levels of precision. In addition, according to the requirements of the accuracy of the motion, the smoothness of the transmiss

  November 12, 2019