What other measures can prevent the wear of the gears of the KA87-102.71-3K reducer

Stay clean: Clean the dust and debris around the reducer regularly to prevent it from entering the reducer, as dust and impurities may aggravate the wear of the gears.

Control temperature and humidity: Avoid the reducer in a high-temperature and high-humidity environment. High temperatures will cause the lubricant performance to slow down and accelerate gear wear. The temperature can be controlled by installing a heat dissipation device or improving ventilation conditions; high humidity may cause rust of the gears, and desiccants can be used to keep the environment dry.

Reasonable design of gear parameters: During the design stage, according to the working conditions of the reducer, reasonably select the gear module, number of teeth, tooth shape and other parameters to improve the gear's load-bearing capacity and wear resistance. For example, appropriately increasing the modulus of the gear can improve the strength and wear resistance of the gear.

Correct Selection reducer: According to the actual workload, speed, transmission ratio and other requirements, select the KAF77 hard-toothed reducer of the appropriate model and specifications to ensure that it has sufficient load-bearing capacity and transmission efficiency, and avoid overload and wear of the gear due to improper Selection.

Nitriding treatment: Nitriding the surface of the gear can form a nitriding layer on the surface of the gear, which can improve the wear resistance, corrosion and glue resistance of the gear.

Hard chrome plating treatment: Hard chrome plating can improve the hardness and finish of the gear surface, reduce friction coefficient, reduce wear, and improve the corrosion resistance of the gear.