Structural characteristics of slope reducer

1. Inclined reducer;
The transmission ratio of the reducer is fixed, but in engineering practice, some working machines usually need to work at several different speeds, so the transmission ratio requirements between the prime mover and the working machine must be adjusted at any time according to the use;
2. The structure of the inclined plane reducer;
It is mainly composed of gears (or worms), shafts, bearings, boxes, etc.The box must be sufficiently rigid.In order to ensure the rigidity and heat dissipation of the box, reinforcing ribs are usually made on the outer wall of the box.In order to facilitate the manufacture, assembly and use of the bevel gear reducer, a series of accessories are also provided on the bevel reducer, such as inspection holes, ventilation holes, oil data gauges or oil level indicators, hooks and cap screws;
3. Distribution ratio:
Make the transmission have a minimum moment of inertia; make the immersion depth of the large gears of the large transmission class approximately equal; make the load-carrying capacity of all classes close to the same; minimize the external size and mass of the bevel reducer;
Working principle: according to the friction transmission, change the output radius of the driving and driving parts to realize the change of the transmission ratio;
4. The function of the reducer:
The transmission ratio can be changed at any time according to the needs;
5. Deceleration type:
Step-by-step transmission - the transmission of step-by-step transmission can only be changed in steps by the operating mechanism according to the established design requirements, and stepless transmission - the transmission ratio of stepless transmission can be reached within the scope of the design;