How to determine whether the lubrication system oil volume of BWED153-595-4KW cycloidal pin wheel reducer is suitable

To determine whether the oil volume of the BWED153-595-4KW cycloid pin wheel reducer lubrication system is suitable, you can check the oil level mark, observe the gear immersion depth and reference the operating status of the equipment, etc., the specific details are as follows:

• Check oil level marks : Most cycloid pin wheel reducers have oil windows or oil rulers. If there is an oil window, you can observe directly. The oil surface should be kept at 1/2 to 2/3 of the oil window, or near the center line of the oil window. If it is an oil scale, when the machine is shut down, the oil level should be between the upper and lower scale lines of the oil scale, usually at 2/3 of the two scale lines.

• Observe the depth of the gear immersion : The cycloid pin wheel reducer is generally lubricated with an oil bath. Under normal circumstances, the depth of the gear immersed in the oil should be 1-2 teeth high. It can be shallower at high speeds and deeper at low speeds. If the gear is immersed too shallow, it means that the amount of oil may be insufficient; if the amount of oil is immersed too deep, it may be too much.

• Reference equipment operating status : If the oil volume of the reducer lubrication system is appropriate, the equipment should be relatively stable during operation, the noise and vibration are small, and the oil temperature will also remain within the normal range, generally 60-80℃. If the amount of oil is too small, the noise and vibration will increase due to insufficient lubrication and poor heat dissipation, and the oil temperature will rise. If the amount of oil is too high, the loss of oil stirring may increase, which will increase the operating load of the equipment and the oil temperature will also increase. Based on this, the actual situation during the operation of the equipment can assist in determining whether the oil volume is appropriate.

• Check the equipment manual : The oil quantity standards of reducers produced by different manufacturers may vary. The user manual or technical document provided by the manufacturer of the BWED153-595-4KW cycloid pin wheel reducer should be consulted, which will clearly specify the oil level range or specific oil quantity requirements for this model reducer. This is an important basis for judging whether the oil quantity is appropriate.