In recent years, the gear reducer has been widely used in the machining industry. We must improve our mastery of the basic knowledge of the gear reducer. Only in this way can we better operate the gear reducer in the future.
Measures / specific steps:
1. Pay attention to the construction of reducer assembly site. For the assembly of the reducer, the ground shall be flat and the ventilation conditions shall be as good as possible. It is necessary to know that the assembly site will have a great impact on the use of the reducer in the future.
2. Pay attention to the daily maintenance of the reducer. You can't only use it without maintenance. This is a big taboo for the use of the reducer. What a good equipment, without maintenance, its service life should be reduced by at least one third.
Therefore, the daily maintenance of the reducer is very important. The daily maintenance of the reducer involves the use and replacement of lubricating oil, the inspection of whether everything is normal, such as the assembly foundation, seals and transmission shaft, and the maintenance of key parts such as the shell.
The reducer cleaning and maintenance machine uses the original oil supply and drainage system of the reducer and the filtered old oil to realize the functions of cleaning the reducer, rapid filtration of waste oil and filling new oil. The hardware facilities and cleaning agent are not changed during the operation process, which ensures the safe operation of the reducer and increases the service life.
3. Pay attention to the maintenance when the reducer is out of service. When the reducer is out of service, the customer can't ignore it. Like a car, it's no problem to drive every day, but if it's a year, regardless of the sun and rain, you may want to drive again, you need to go to the garage first. When the reducer is idle, pay attention to regular inspection and maintenance according to the provisions of the operation manual. When it is reused, it can be ensured that it can be used immediately without accidental failure.
Our products are mainly exported to Japan, the United States, Germany, Southeast Asia and other countries and regions. Our customers include many OEM customers specializing in construction machinery. We have partnered with several of the Fortune 500 companies to become one of their major foundry suppliers in China.
How to provide goods?
Usually we will ship the goods to the sea. The factory is only 460 kilometers away from the port. It is very convenient and convenient to transport the goods to any other country. Of course, if your cargo is very urgent, Ningbo Airport and Shanghai Airport are also nearby.
What is the payment term?
When we provide you with a quotation, we will negotiate with you: EXW, FCA, FOB, CIF, CRF, DAP Etc. For mass production, you need to pay 30% of the deposit before production and 70% of the balance before shipment. Our most common way is T/T.
How to ensure the quality of your products?
First, we will check after each process. For finished products, according to customer requirements and international standards.
How many employees does your company have? What is the relationship between technicians?
We now have more than 180 employees, including 36 engineers and 28 QCs.
What is the ability of your company?
We have a number of production lines with a monthly production capacity of 1,600 units and an annual production capacity of 20,000 units.
