WeiGao Transmission
Email: sales@wgt.net.cn
Home / Products / WP series worm gear box / WP single-stage reduction ratio (1/10-1/60) / WPO40 ~ 250 Worm Gear Reducer

Product Search

Share to:

WPO40 ~ 250 Worm Gear Reducer

  • WPS40 ~ 250
  • $ 24 ~ $ 800
  • 10
  • 3 days (1-100 pieces)
  • 50 pieces
  • 30 days (3000 pieces)
  • wire transfer
  • Standard export plywood box
  • Ningbo / Shanghai Port
  • One year
  • WGT
  • Zhejiang, China

WP series reducer, the worm is made of 45 # high-quality steel after heat treatment, the worm gear is cast with tin bronze, good wear resistance, especially in bearing capacity is more obvious, mainly suitable for plastics, metallurgy, beverages, mine , Hoist transportation, chemical construction and other mechanical equipment deceleration transmission.
BOOK.pngelectronic content    BOOK5.pngPDF catalog

A. Features:

1. Stable transmission, low vibration, low impact, low noise, large reduction ratio, strong versatility, suitable for all kinds of mechanical equipment.

2. Single-stage transmission, large transmission ratio, compact structure. Most speed reducers have good self-locking performance, and the braking device can save the mechanical equipment with braking requirements.

3. The friction loss between the worm gear and the tooth surface of the worm gear is large, the transmission efficiency is lower than the gear, it is easy to be heated, and the temperature is higher.

4. Higher requirements for lubrication and cooling.

5. Very good match. Worms and worms are manufactured according to national standards.

B. Working conditions:

1. The speed of the worm reducer should not exceed 1500r / min.

2. The working environment temperature is -40 ° C to + 40 ° C. When the working environment temperature is below 0 ° C, the lubricating oil must be heated to above 0 ° C before starting heating. When the working environment temperature is above 40 ° C, cooling Measures must be taken.

3. The feed shaft of the worm gear reducer can rotate forward or reverse.

C. Note:

1. Worm gear shaft shall not be used as input shaft.

2. The machine does not pump oil when it leaves the factory. Before operation, sufficient mechanical oil must be added.

3. The supporting motor (ie power) shall not exceed the value specified in the sign.

4. If the user wants to change the direction of entering the shaft, please remove the lower end cover of the shaft, take out the worm and adjust 180. Load it. According to the installation without knocking hard, you can slowly drive the two shafts to make it mesh.

Technical data
Types of: WP gearbox
specification: WP 40-250
Speed ratio: 1: 10,15,20,25,30,40,50,60,200,300,400,500,600,800,900,1200,1 500,1800,2400,2500,3000,3600
colour: Blue / silver or according to customer requirements


Housing: cast iron casting

Worm gear-copper-10-3 #

Carburized and quenched Worm-20CrMn Ti, the surface harness strength is 56-62HRC

Shaft chrome steel 45 #

package: Carton and wooden box
Bearing: C & U Bearing
seal: NAK SKF
Warranty: One year
input power. 0.06KW, 0. 09KW, 1.1KW, 1 5KW 2.2KW, 3KW, 4KW, 5 5KW, 7 5KW
Application industry: Industrial machinery: food, ceramics, chemical packaging, dyeing, carpentry, glass.
IEC flange: 56B14, 63B14, 63B5, 63B5, 71B14, 80B14, etc.

WP Single Reducer Ratio has the following models:

WPA40  WPA50  WPA60  WPA70  WPA80  WPA100  WPA120  WPA135  WPA147  WPA155  WPA175  WPA200  WPA250

WPDA50  WPDA60  WPDA70  WPDA80  WPDA100  WPDA120  WPDA135  WPDA147  WPDA155  WPDA175  WPDA200  WPDA250

WPKA40  WPKA50  WPKA60  WPKA70  WPKA80  WPKA100  WPKA120  WPKA135  WPKA155  WPKA175  WPKA200  WPKA250


WPO40  WPO50  WPO60  WPO70  WPO80  WPO100  WPO120  WPO135  WPO147  WPO155  WPO175  WPO200  WPO250

WPDO50  WPDO60  WPDO70  WPDO80  WPDO100  WPDO120  WPDO135  WPDO147  WPDO155  WPDO175  WPDO200  WPDO250

WPS40  WPS50  WPS60  WPS70  WPS80  WPS100  WPS120  WPS135  WPS147  WPS155  WPS175  WPS200  WPS250

WPDS50  WPDS60  WPDS70  WPDS80  WPDS100  WPDS120  WPDS135  WPDS147  WPDS155  WPDS175  WPDS200  WPDS250

WPKS40  WPKS50  WPKS60  WPKS70  WPKS80  WPKS100  WPKS120  WPKS135  WPKS155  WPKS175  WPKS200  WPKS250


WPX40  WPX50  WPX60  WPX70  WPX80  WPX100  WPX120  WPX135  WPX147  WPX155  WPX175  WPX200  WPX250

WPDX50  WPDX60  WPDX70  WPDX80  WPDX100  WPDX120  WPDX135  WPDX147  WPDX155  WPDX175  WPDX200  WPDX250

WPDZ50  WPDZ60  WPDZ70  WPDZ80  WPDZ100  WPDZ120  WPDZ135


wp selection table.png

Single level parameter 1.png

P For complete information on all models, specifications, speed ratios, prices, etc. of WP series products, please click here to view


China WeiGao Transmission

WeiGao REDUCER is a high-tech enterprise integrating scientific research, development, manufacturing, sales and service. 

+86 400 801 9158

Email:sales@wgt.net.cn   wgt.net.cn@gmail.com
Fax: +8657185023658