ZQ JZQ soft tooth surface reducer
electronic content 
PDF catalog
ZSY/ZLY/ZDY Cylindrical gear reducer, gear carburizing, quenching, grinding, high load capacity, low noise; mainly used for belt conveyors and various transport machinery, also can be used for driving other general machinery.The advantages are: the input shaft and output shaft are vertically arranged in the drive device, the bearing capacity is strong, the service life is long, the volume is small, the efficiency is high, and the weight is high.
Cylindrical gear reducers are widely used in metallurgical equipment, mining equipment, automation equipment, food machinery, packaging equipment, tobacco equipment, etc.
ZSY / ZLY / ZDY cylindrical gear reducer
ZSY / ZLY / ZDY cylindrical gear reducer is a three-stage involute cylindrical reducer, mainly used in the reduction transmission of various mechanical equipment, such as mining, metallurgy, cement, construction, chemical industry, light industry, etc.After the workplace is installed vertically, the speed of the high-speed spindle does not exceed 1500 r/min, and the working environment is + 40°C, 40°C - and positive and negative operations.
The gears of DBY cylindrical gear reducer are carburized, quenched, ground, high load capacity and low noise; it is mainly used in belt conveyors and various transportation machinery, and can also be used to drive other general machinery.The advantages are: the input shaft and output shaft are vertically arranged in the drive device, the bearing capacity is strong, the service life is long, the volume is small, the efficiency is high, and the weight is high.
Cylindrical gear reducers are widely used in metallurgical equipment, mining equipment, automation equipment, food machinery, packaging equipment, tobacco equipment, etc.
DBY cylindrical gear reducer
DBY cylindrical gear reducer is a three-stage transmission of involute cylindrical gear reducer.It is mainly used for reducing transmission of various mechanical equipment, such as mining, metallurgy, cement, construction, chemical industry, light industry, etc.It is suitable for occasions where the workplace is limited, the vertical installation is adopted by the structure, the high-speed spindle speed does not exceed 1500 l/min, the working environment is +40°C and 40°C-, it can be operated in positive and negative directions.
main features
1. The gear is made of high-strength low-carbon alloy steel, carburized and quenched.The hardness of the tooth surface is HRC58-62.The gears are all ground with high precision and good contact.
2. High transmission rate: single-stage is greater than 96.5%, double-stage is greater than 93%, and three-stage is greater than 90%.
3. Stable operation and low noise.
4. Small size, light weight, long service life and high bearing capacity.
5. Easy to disassemble and install.
