The BLD7 - 29 - 30KW cycloid reducer with broken output shaft cannot continue to be used. The reasons are as follows:
Unable to transmit power normally: The output shaft is a key component of the reducer transmitting power to external equipment. Once it is broken, the power cannot be effectively transmitted. The connected working machinery such as conveyor belts, mixers, etc. cannot operate as required, and the production process will be interrupted.
Other faults are caused: After the output shaft is broken, the gears, bearings and other components inside the reducer will lose their normal support and transmission relationship, and the stress conditions will change, resulting in overloading, wear and even damage to these components. At the same time, the load of the motor will also increase abnormally, which may cause problems such as overheating and burning of the motor.
There are safety hazards: if the output shaft is broken, the reducer may experience severe vibration, loose parts or even fall off, posing a safety threat to the operator and surrounding equipment.
Therefore, if it is found that the output shaft of the cycloid reducer is broken, it should be stopped immediately and contacted with a professional maintenance personnel or manufacturer for repair, such as welding repair, replacement of the output shaft, etc. After maintenance, the reducer must be thoroughly inspected and debugged to ensure that it returns to normal operation before putting it into use.