Introduction to R series gear reducer 1. Highly modular design: it can be easily equipped with various types of motors or other power inputs.The same model can be equipped with motors of various powers.It is easy to realize the combined connection between various models.2. Transmission ratio: fine division and wide range.Combined models can form a large transmission ratio, that is, output extremely low speed.3. Installation form: the installation position is not limited.4. High strength and small size: the box body is made of high-strength cast iron.The gears and gear shafts adopt the gas carburizing, quenching and fine grinding process, so the bearing capacity per unit volume is high.5. The gear with hard tooth surface is made of high-quality alloy steel, the surface is hardened by carburizing and quenching, the teeth are finely ground, the transmission is stable, the noise is low, and the bearing capacity is large.6. Low noise: The main components of the reducer are precision-processed, assembled and tested carefully, so the noise of the reducer is low.R series gear reducer model: R17~R177 (consult for details) Power: 0 Read More

Introduction to F series gear reducer 1. F series reducer is manufactured in accordance with international technical requirements and has high technological content.2. Space-saving, reliable and durable, with high overload capacity, the power can reach more than 90KW.3. F series parallel shaft helical gear reducer has low energy consumption, good performance, and the efficiency is as high as 95%.4. The parallel shaft helical gear reducer has low vibration, low noise and high energy saving. It adopts high-quality section steel material, rigid cast iron box body, and the gear surface is subjected to high-frequency heat treatment.5. After precision machining, the parallelism of the shaft and the accuracy of positioning are ensured. All these constitute the reducer of the gear transmission assembly and are equipped with various motors, forming a mechatronic integration and ensuring the quality characteristics of the reducer motor product.F series gear reducer model: F37~F157 (consult for details) Power: 0.18kw~75kw Specification: 380v (three-phase), anti-exposure motor, anti-static, frequency conversion, etc. Read More

Introduction to K series gear reducer 1. K series reducer has high technological content, and has a combination of helical gear and worm gear, which improves the torque and efficiency of the machine.This series of products has complete specifications, wide speed range, good versatility, suitable for various installation methods, safe performance, reliable and long life, and implements the requirements of international standards.2. Space-saving, reliable and durable, with high overload capacity, the power can reach more than 200KW.3. Low energy consumption, superior performance, and the efficiency of the geared motor is as high as 95%.4. The concave and convex surface of the body has a heat dissipation effect, strong vibration absorption, low temperature rise, and low noise.Good sealing performance, strong adaptability to working environment.5. K series helical gear worm gear reducer has high transmission precision, and is especially suitable for working in occasions with frequent startups. It can be connected to various reducers and configured with various types of motor drives, and can be installed at a 90-degree transmission operating position.6. The key components of the K helical gear reducer are made of high wear-resistant materials, and have been specially Read More

Brief introduction of planetary cycloid reducer The entire transmission device of planetary cycloid reducer can be divided into three parts: input part, deceleration part and output part; according to the structure, it can be divided into: horizontal type, vertical type, direct connection type, double shaft type Four kinds.1. Large transmission ratio.One-level, two-level, three-level and more combinations can be adopted as required.2. High transmission efficiency.Since the meshing part of the machine adopts rolling meshing, the average efficiency can reach more than 90%.3. Few faults, long life.The main transmission meshing parts are made of bearing steel grinding, so the mechanical properties and wear resistance are good, and because of rolling friction, there are few failures and long life.4. The operation is stable and reliable.Due to the multi-teeth meshing in the transmission process, it makes it run smoothly and reliably with low noise.5. Easy disassembly and assembly: easy maintenance.6. Strong overload capacity.Impact resistance, small moment of inertia, suitable for frequent starting and forward and reverse operation.Applications Military, aerospace, metallurgy, mining, petroleum, Read More

Brief introduction of BWD horizontal cycloidal reducer B series cycloidal pinwheel reducer is a kind of machine that realizes deceleration by cycloidal pin-tooth meshing according to the principle of planetary transmission with small tooth difference.The machine is divided into horizontal, vertical, biaxial and direct-connected assembly methods.1. Large reduction ratio and high efficiency.The reduction ratio of the first-stage transmission is 9~87, the reduction ratio of the two-stage transmission is 121~5133, the multi-stage combination can reach tens of thousands, and the pin-tooth meshing system is sleeve-type rolling friction, and the meshing surface has no relative sliding, so the efficiency of the first-stage reduction reaches 94%.2. Stable operation and low noise.There are many pairs of teeth in contact with each other during operation, the degree of overlap is large, the operation is stable, the overload capacity is strong, the vibration and noise are low, and the models of various specifications have low noise.3. Reliable use and long service life.Because the main parts are made of high-carbon alloy steel after quenching treatment (HRC58-62), and then finely ground, and the cycloid teeth and the pin gear sleeve are meshed and transmitted to the pin teeth to form a rolling friction pair, and the friction coefficient is small, so that there is no phase in the meshing area. Read More

Introduction to intermediate transmission sludge scraper This product is driven by deceleration and suspension components, and the sludge is scraped and collected by the scraper to the intermediate sludge collection tank, and the sludge is discharged out of the pool by hydrostatic pressure or pump.The middle water inlet and mud discharge are adopted, and the peripheral drainage is adopted to ensure uniform water flow.Self-priming mud discharge using liquid level difference, with scum scraping and removal device and overload protection device.Features 1. The transmission part adopts electrical and mechanical double overload protection, which makes the operation safer and more reliable.2. The underwater part is made of stainless steel, which is corrosion-resistant and has a long service life.Application range The intermediate transmission mud scraper can be widely used in sewage treatment projects in cities, chemical industry, light textile, metallurgy and other industries.It has reasonable structure, high efficiency, convenient operation and maintenance, and is an ideal supporting facility for sewage treatment projects.Product Series Cycloid Mixer Series Power: 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw Read More