The small geared motor is a widely used deceleration transmission equipment. The maintenance method of the small geared motor is as follows: 1. Keep the geared motor well lubricated, pay attention to adding gear oil or replacing the gear oil, and there is no dry friction.2. First of all, in terms of external environment, tools, accessories, and workpieces (products) should be placed neatly, and pipes and lines should be organized.Small geared motor.3. Regularly clean all parts of the rotary gear reduction motor. If there are debris, sundries and stolen goods around the reduction motor, the staff should clean them up in time.4. Next, in terms of rules and regulations, the staff who operate the gear reduction motor must abide by the operating procedures, do not use the gear reduction motor with overload, the mechanical protection devices are reliable and complete, and pay attention to timely eliminate unsafe factors.5. Clean the motor reducer.Remove the dust and sludge on the outside of the motor reducer frame in time.If the use environment is dusty, clean it once a day.6. Check and clean the motor reducer wiring Read More

Every company expects high-end product structure to win high-margin stores, but product upgrades must have appropriate soil cooperation, and cultivating this soil is a step-by-step process, especially in gearbox manufacturing: First, high-skilled training needs talents accumulated over the years Read More

Every company expects a high-end product structure to win high-profit stores, but product upgrades must have proper soil cooperation, and cultivating this soil is a step-by-step process, especially in gearbox manufacturing: first, high-skills Training needs of talents For many years, the accumulatio Read More

1. Allows cycloidal gear reducers to be used in continuous work systems, allowing both forward and reverse directions.2. The rated speed of the input shaft is 1500rpm.When the input power is greater than 18.5 kW, it is recommended to use a 6-pole motor with 960 rpm.3. Read More

1. The cycloidal pinwheel reducer is allowed to be used in the continuous working system, while allowing both forward and reverse directions. 2. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a 6-pole motor with 960 rpm. 3. The Read More

1. Heat and oil leakage sequentially improve efficiency, worm gear reducers usually use non-ferrous metals as worm gears, and worms use harder steel.Because it is a sliding friction drive, more heat will be generated during operation, which will cause a difference in thermal expansion between P Read More