Planetary reducers and gear reducers are two common types of reduction equipment.They have different structures, technical parameters, transmission efficiencies, lowering ranges and application schemes; planetary reducers have smaller structures, good meeting intervals, high precision, and long-term service Read More

As a common type of reducer, the gear reducer is very rich in gear types, usually including: ordinary cylindrical gears, bevel gears, planetary gears, worm gears, non-circular gears, cycloidal pin gears, arc gears, hard Toothed helical gears.In the application of gear reducers, how should we accurately choose their types? Here are some suggestions for everyone: 1. It is necessary to Selection according to the requirements of the structure of the gear reducer, that is, Its installation method is selected, for example, whether it needs to be installed with a parallel shaft or a vertical shaft, the connection mode between the input end and output end of the reducer and the equipment, whether the installation direction is floor type or other forms, etc.; 2. According to the product requirements Required parameters to limit the selection, such as the range of parameters such as transmission ratio, torque, and outer diameter required by the product can help us refer to Selection; 3. According to the use environment of the reducer: including room temperature, humidity, dust size, etc., using Read More

Planetary reducers are generally used in transmission equipment with low speed and high torque. It is a power transmission mechanism that reduces the number of revolutions of the motor to the required number of revolutions by means of the speed converter of the gear to obtain a larger torque. .The function of the reducer: 1. Deceleration increases the output torque. The torque output ratio should be multiplied by the reduction ratio of the motor output, but be careful not to exceed the rated torque of the reducer.2. The rotational speed also reduces the inertia of the load to the square of the reduction ratio.Types and characteristics of reducer: 1. Worm gear reducer: It is characterized by the function of reverse self-locking, which can have a large reduction ratio, and the input shaft and output shaft are not on the same axis or plane.However, it is usually bulky, with low transmission efficiency and low precision.2. Harmonic reducer: its characteristic is that the harmonic drive uses the controllable elastic deformation of the flexible element to transmit power, small in size and high in precision. The disadvantage is that the flexible wheel has limited life, poor impact resistance, and rigidity compared with metal parts. Read More

The reducer is an independent component consisting of gear transmission, worm transmission, and gear-worm transmission enclosed in a rigid shell. It is often used as a reduction transmission device between the original moving part and the working machine.It plays the role of matching speed and transmitting torque between prime mover and working machine or actuator, and is widely used in modern machinery.In the process of using the reducer, you should also learn to check and maintain it to prolong the service life of the reducer. It is recommended to carry out inspection and maintenance from the following aspects: 1. Check and ensure the normal operation of the starting equipment Check the contactor contacts, coil cores and wiring Whether the screws are reliable, whether the mechanical parts are flexible, in order to maintain a good technical condition, to ensure that the reducer will not burn when it is started.The technical state of the reducer starting device plays a decisive role in the normal start of the reducer.Practice has proved that the vast majority of burning reducers are mainly caused by improper operation of starting equipment.2. Keep the reducer clean while the reducer is running Read More

Read More

Read More