Author: Site Editor Publish Time: 31-08-2022 Origin: Site
The standard IPX of the international industrial production waterproof level is the same as the JIS level of the American manufacturing groundwater level waterproof standard, divided into 9 levels 0-8, and recorded here.
Level 0 unprotected;
Level 1 also eliminates the harmful effects of vertically falling water droplets;
Level 2: It has the safety protection function of reducing water droplets within 15 degrees from the vertical angle;
Level 3 also eliminates the harmful effects of water spray droplets at a vertical angle of 60 degrees;
Level 4 also eliminates the harmful effects of water droplets splashed from other directions;
Level 5 also eliminates the harmful consequences of the volume of water ejected from the nozzle in all directions;
Level 6 also eliminates the harmful and adverse effects of super-strong water discharge from nozzles in all directions;
The top of level 7 is 0.15-1 m from the water surface and lasts for 30 minutes.Service performance was unaffected and there were no water leaks.
The top of level 8 is 1.5-30m from the water surface and lasts for 30 minutes.Service performance was not adversely affected and there were no water leaks.
In the future, you should look out for three proofing phones to buy.Only people with levels 7 and 8 are really waterproof; level 6 can also be called rainproof.Cell phones and GPs used for outdoor activities should be at this level.
What effect does humidity have on the life of the ZQA350-12.64 reducer?
What are the specific effects of humidity on the operation of ZQ650-31.5-5 gear reducer?
How to judge the degree of gear breakage of ZLYJ146-12.5 reducer
How long does it take to replace the ZLYJ375-16-2 reducer gear after it breaks?
How to adjust the input torque of WHX125-50 worm gear reducer
What is the impact of WHT08-63-8Z reducer box material on noise?
How to check whether the CWU225-2F reducer has a box rupture
What are the causes of poor gear contact in ZLY250-21.73-II reducer?
How will the wear of the CWU250-50-IF worm gear reducer change under different operating conditions?
What are the typical application scenarios of WPEDO70-120-300-0.75KW?
Technical parameters and performance characteristics of WPEDO100-155-150-2.2KW worm gear reducer
How to deal with abnormalities during the trial operation of ZQ250-31.5-4 gear reducer
What tools are needed to replace the bearings of TY125-40-4KW shaft-mounted reducer?
Does the FAF47-36.34-1.5KW gear reducer seal need to be run-in after replacement?
How to ensure accurate alignment when installing WHT80-8-I arc cylindrical worm gear reducer
How to ensure the quality of foundation fixing and leveling of WHX125-40:1 worm gear reducer
What are the specific structural auxiliary measures of CWS200-12.5-SZ worm gear reducer?
Introduce the installation precautions of CWU280-20 worm gear reducer
What are the application fields of parallel axis helical gear reducer?
What are the common faults in the internal gear transmission system of CJY160-160-LZ-5.5KW reducer?