1. When in use, the connecting rod of the output shaft coupling shall be fixed to ensure that the two shafts are parallel to the base and the diameter bolts to be installed are installed appropriately to ensure the reliable closing of the reduction motor.2. All equipment shafts installed on the outp Read More

A reducer is also a speed reducer, but usually uses a speed reducer to slow down.It is customarily called a reducer; usually, a reducer has a fixed transmission rate, which is adjustable, but usually through stages.It's easy for everyone to think there's adjustable red Read More

The reducer is also a speed reducer, but usually the speed reducer is used to slow down. It is habitually called the reducer; Generally, the reducer has a fixed transmission ratio and is adjustable, but it is usually adjusted by stages. It's easy for everyone to think that there is an adjustable red Read More

Planetary reducer and gear reducer are two kinds of common reduction equipment. They have different structures, technical parameters, transmission efficiency, reduction range and application scenarios; The planetary reducer has small structure, small well meeting interval, high accuracy, long servic Read More

Planetary reducers and gear reducers are two common types of reduction equipment.They have different structures, technical parameters, transmission efficiencies, lowering ranges and application schemes; planetary reducers have smaller structures, good meeting intervals, high precision, and long-term service Read More

As a common type of reducer, the gear reducer is very rich in gear types, usually including: ordinary cylindrical gears, bevel gears, planetary gears, worm gears, non-circular gears, cycloidal pin gears, arc gears, hard Toothed helical gears.In the application of gear reducers, how should we accurately choose their types? Here are some suggestions for everyone: 1. It is necessary to Selection according to the requirements of the structure of the gear reducer, that is, Its installation method is selected, for example, whether it needs to be installed with a parallel shaft or a vertical shaft, the connection mode between the input end and output end of the reducer and the equipment, whether the installation direction is floor type or other forms, etc.; 2. According to the product requirements Required parameters to limit the selection, such as the range of parameters such as transmission ratio, torque, and outer diameter required by the product can help us refer to Selection; 3. According to the use environment of the reducer: including room temperature, humidity, dust size, etc., using Read More