Side-entry desulfurization tower agitator Introduction Side-entry desulfurization tower agitator (also known as side-entry agitator) is an agitator with a stirring device installed on the side wall of the equipment cylinder.Select the corresponding agitator according to the physical properties, capacity and stirring purpose of different media.Generally, the three-blade propeller is used because it has strong circulation ability and low power consumption. It can reflect its advantages in large-capacity homogeneous and mixing processes. It can be used in low-viscosity liquid heat transfer, reaction, and suspension with small solid-liquid ratio. , Widely used in the dissolution process.The side-entry agitator is widely used in desulfurization, denitrification and agitation of various large storage tanks or storage tanks.Especially in large storage tanks or storage tanks, using one or more units to work together can get a good stirring effect with low energy consumption.Application fields Petrochemical, metallurgy, food, paper making, electric power, environment and other fields.Product Series Cycloid Mixer Series Power: 0.37kw, 0.55kw, 0.75kw, 1. Read More

Introduction to Fermentation Mixer (Fermentation Tank Mixer) This product uses the function of a mechanical stirrer to fully mix the air and fermentation liquid to promote the dissolution of oxygen, so as to ensure the supply of dissolved oxygen required for the growth, reproduction and metabolism of microorganisms.Fermenter mixers play a particularly important role throughout the development of pharmaceutical and biological products.The technical key of standard fermenter design lies in the problem of gas-liquid two-phase flow which is complex in stirring technology.This product can not only save considerable investment for pharmaceutical companies, but also greatly save energy consumption and other operating costs, while increasing product output and yield.This product is widely used in the biological fermentation industry, such as glutamic acid, amino acids, citric acid, itaconic acid, antibiotics, etc., are commonly used in the aerobic fermentation process.Product Series Cycloid Mixer Series Power: 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw Read More

Brief introduction of high-speed dispersing disc mixer This product is mainly aimed at solid-liquid mixtures and liquid-liquid mixtures with different viscosities. Through the high-speed operation of the upper and lower sawtooth of the dispersing disc, the materials are strongly sheared, impacted, crushed and dispersed. Simultaneously during the process of dispersing and stirring.The motors of various specifications such as electromagnetic speed regulation, frequency conversion speed regulation and three-speed are used to run stably and powerfully, and are suitable for various viscosities.Lifting and rotating freely, suitable for various positions.Safe, reliable, easy to operate and maintain.The production continuity is strong, the material can be quickly dispersed and dissolved, the dispersion effect is good, the production efficiency is high, the operation is stable, and the installation is easy.Application field Coatings, dyes, pigments, inks, adhesives and other chemical industries, have good effects on dispersion, emulsification, crushing, suspension, dissolution, etc. device of.Product Series Cycloid Mixer Series Power: 0.37kw, 0.55kw, 0.7 Read More

Introduction to lithium battery mixer 1. Adopt advanced intermediate temperature measurement form (the temperature measurement rod directly measures the temperature of the material), and the temperature measurement is more accurate.2. Adopting the rising form of the barrel body, on the basis of meeting the production requirements of the automatic production line, it also greatly improves the operation stability and service life of the machine.3. Equipped with an emulsifying device, the high-speed emulsifier and the dispersing disc can be used at the same time or interchangeably, which greatly improves the fineness of the battery slurry and effectively solves the phenomenon of 'skinny meat' in the traditional battery slurry stirring .4. More scientific and finer (stirring) paddle-to-paddle, paddle-to-barrel spacing design, the stirring paddle is made of pure stainless steel with precision grinding tools, and the accuracy is guaranteed.5. The core components (planetary box, etc.) are processed by CNC with higher precision; the skeleton oil seal and other components are imported from Japan, and the service life is more than 5 years (the skeleton oil seal currently used in domestic equipment generally has a life span of only 1-2 years) .Application Field Fuel Read More

Chemical reactor agitator Introduction The chemical reactor agitator is mainly composed of motor, reducer, water jacket body, sealing cylinder, support body, outer magnetic steel body, inner magnetic steel body, upper and lower stirring shafts, paddles, control box, etc. composition.The motor and reducer are installed on the water jacket body, the outer magnetic steel body is installed on the motor and reducer through the rotary body assembly, the inner magnetic steel body is installed on the shaft of the supporting body, and is covered by the sealed cylinder, and the lower end of the upper shaft It is integrated with the lower shaft by a coupling.The motor and reducer drive the outer magnetic steel body to rotate, and drive the inner magnetic steel body installed inside the sealed cylinder to rotate through magnetic coupling. The shaft of the inner magnetic steel body and the stirring shaft are connected as a whole with a coupling to stir the materials. .Since the inner magnetic steel body and the stirring shaft are installed inside the sealing cover, and the plane between the sealing cylinder and the kettle body can be pressed with metal graphite pads by bolts, thus fundamentally changing the relationship between the stirring shaft and the kettle body The dynamic seal 'is 'static seal', thus realizing no leakage under high temperature and high pressure.application Read More

Introduction to the dosing mixer The dosing mixer is mainly composed of a motor, a reduction device, a stirring shaft and paddles.There are various forms of stirring blades, but no matter what type of blades are in use, when the mixer is in operation, its shaft power consumption will produce two parts, one is the displacement generated by the blades, and the other is the pressure generated by the blades. head.The pressure head generated by the paddle can be divided into two parts, namely the static pressure head and the shear force.When the mixer blade is in operation, it must overcome the static pressure head, and the shear force makes the material disperse and mix.Therefore, according to the displacement produced by the blade, the ability to overcome the static pressure head and generate shear force, all blades can be divided into three basic types, namely flow type, pressure head type and shear type.While each type of blade provides a certain basic function (such as the basic function of a flow type blade is to generate liquid displacement), it also provides two other functions (generating shear and overcoming static pressure head).Product Series Cycloid Mixer Series Power: 0.37kw, 0. Read More