The hard tooth surface reducer is a relatively fine machine. The purpose of using it is to reduce the speed and increase the torque. It is suitable for the speed of the high-speed shaft not greater than 1500 rpm, the peripheral speed of the gear transmission is not greater than 20 m/s, and the working environment In an environment with a temperature of -40°C-45°C.The gears of the hard tooth surface deceleration equipment are made of high-strength low-carbon alloy steel through carburizing and quenching. The tooth surface has high hardness. The gears are all made of CNC grinding technology, with high precision, good touchability, high transmission efficiency, stable operation and low noise. ;Small size, light weight, long service life, high carrying capacity; easy to dismantle and install.
Hard tooth surface reducer is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing and dyeing hard tooth surface reducer equipment, pharmaceuticals and other fields.A reducer is a power transmission mechanism that uses a gear speed converter to reduce the number of revolutions of the motor to the desired number of revolutions and obtain a larger torque.
We know that the service life of the reducer is determined by the size of the external load and the rate of internal wear.Excessive internal and external loads can easily lead to tooth breakage, shaft breakage and wear of moving parts, and wear of moving parts will make it difficult to form a lubricating oil film.Therefore, in the case that the reducer has been reasonably Selection and hard-toothed gears are used, the way to improve its service life is to prevent the components driven by the reducer from generating excessive external loads.The installation of the reducer must meet the corresponding installation requirements to prevent excessive additional force due to poor alignment, lack of matching accuracy, excessive vibration, etc., thereby accelerating the damage of the reducer.This kind of failure should be discovered and dealt with in time at the initial stage of operation or during operation, otherwise, the vibration load may cause abnormal conditions such as accelerated wear or bearing running circles, which will reduce the service life of the reducer.
