The planetary reducer is a transmission that converts the high speed and low torque of the electric motor into low speed and high torque.This is a new generation of practical equipment.It has the characteristics of low noise, high torque, high precision and lifetime maintenance.Planetary reducers are widely used in aerospace engineering, medical and health, machining centers, automobile manufacturing, environmental protection technology and other fields.
What problems should be paid attention to when disassembling, inspecting and maintaining the planetary reducer?
1. If the planetary reducer has a half-coupling, please remove the half-coupling first, remove the fixing bolts, screw the nuts onto the bolts for a reasonable storage space, and check whether the upper shell is damaged or cracked;
2. If bolts are missing or other abnormal conditions are detected, insert a large rod into the upper case and lift it onto the prepared bottom plate;
3. Measure the clearance of each bearing with a tactile gauge or lead wire compression.Multiple measurement points for each set of bearings should be recorded, and the lubricating oil in the planetary reducer should be drained and stored in special oil drums;
4. Take out the driving shaft and the driven shaft assembly, mark the grid position of the gears, place each gear assembly on a dry wooden board, stabilize it in an orderly manner to prevent collisions, and remove the bearings and gears of each shaft;
5. When disassembling, please be careful not to damage the parts in the device.Clean parts and dry.If the parts are damaged, please replace them in time.Clean bearings, boxes and gears with kerosene in preparation for subsequent inspection.
The input speed of the planetary reducer is up to 8000rpm.Choose high-strength alloy steel.The whole gear is not only hardened to ensure the service life and continuous use to maintain the original precision.
