We all know that the use process of the reducer is not smooth. It may be due to poor use of the operator or some external factors that have a certain impact on the machine itself. The manufacturer will take this into consideration during the production of the machine, so The machine itself has certain defense capabilities, but the problem comes again. What if the machine itself has abnormalities because it has been used for a long time?For example, the thermal power of the machine is not within the normal range.Many users actually don't pay attention to this point when they are working, and they don't know the content of this aspect. Let's find out next.
1. It is very important that there is no problem with the thermal power of the reducer. If you find a problem with the thermal power but do not deal with it in a short time, then at a certain running time of the machine, a corresponding fault must occur. At that time, not only It will make the use efficiency of the machine plummet, and some accidental casualties may occur, so the operator needs to pay more attention to this aspect when using it, and try to make relevant records as much as possible, so that it is easier to find changes.
2. For the reducer Selection, an important parameter is the thermal power. The thermal power of the machine is closely related to its heat dissipation. To improve the thermal power, the heating problem in the box should be solved first.During the hot working process of the machine (that is, the process of heat generation and heat dissipation), a lot of heat is caused by the loss of meshing, loss of bearings, loss of churning oil, loss of seal, etc., which makes the temperature of the machine rise due to excessive power loss , restricting the normal functioning of the system and having a great impact on the system of the machine.
3. To give full play to the function of the machine, a key factor is to increase the thermal power, which is mainly through cooling the machine system, increasing its heat dissipation and lubricating oil circulation, under normal circumstances , The added rated cooling of the machine mainly includes: cooling fan, water-cooled coil, forced lubrication system.
