The reducer will be used in many industries, but for those who don't know about the reducer, we still don't know what problems the reducer will encounter in the application process.How do we deal with these problems? Today, Dongchen Xiaobian will introduce to you:
First, the reducer should be used for low-speed applications, the speed does not exceed 1000 rpm, and the suitable range is 1000 to 3000 PPS (0.9 degrees).It can be operated through a reduction gear.The motor has high efficiency and low noise.Do not use the entire step state of the reducer, and the vibration is large in the entire step state.For loads with a large moment of inertia, a motor with a large frame size should be selected.
When the motor is under high-speed or large inertia load, it generally does not start at the working speed, but gradually increases the frequency to increase the speed. One motor does not lose its step, and the second time can reduce noise and improve the positioning accuracy of the stop.For high precision, it should be solved by mechanical deceleration, increase the motor speed, or use high subdivision drive, or use 5-phase motor, but the price of the whole system is more expensive, there are fewer manufacturers, and it is considered to be eliminated as a foreign language.If it has to be solved by changing the voltage, current or adding some damping, the motor should not work in the vibration area.When the working voltage is lower than 600PPS (0.9 degrees), it should be driven by small current, large inductance and low voltage.The principle of selecting the motor after selecting the motor should be followed.
These are the principles and precautions that should be followed when using the reducer, which can prolong the service life of the reducer and reduce troubles during use.The above is the content compiled by the editor, I hope it will be helpful to everyone.
