Functions and types of sewing restorers

Sewing reduction is an important machine in the field of industrial control.It is usually used in transmission equipment with low speed and high torque.This is a power transfer mechanism.It uses a speed converter of gears to decelerate the rotation of the motor to the required rotation and obtain a large torque.

The sewing reducer plays the role of matching speed and matching speed and transmission torque between electric motors or actuators.This is a relatively precise machine.Electric motors, internal combustion engines, or other high-speed power can be slowed down by gearing on the input shaft of the reducer with several teeth on the gear on the large gear on the output shaft.

According to the gearbox type, there are many types of reducers, which can be divided into shifters, worm reducers and planetary gear reducers; according to different transmission stages, they can be divided into single-stage and multi-stage reducers.According to the shape of the gear, it can be divided into cylindrical gear reducer, conical gear and conical cylindrical gear reducer; according to the arrangement of the transmission, it can be divided into deployable reducer, splitter and coaxial reducer .

1. The function of the sewing restorer

At the same time, speed reduces the inertia of the load, which is the square of the reduction ratio.As you can see, most motors have an inertia value.(2) Reduce the speed and increase the output torque at the same time.The torque output rate should be multiplied by the motor output rate, but be careful not to exceed the rated torque of the reducer.

2. Sewing reduction type

General sewing reducers include helical gear reducers, including parallel shaft helical gear reducers, worm gear reducers, bevel gear reducers, etc., planetary gear reducers, circular pin gear reducers, worm gear reducers, planetary friction Mechanical gear invisible gear invisible gear gear blah, blah, blah.

Sewing reducers are generally used in transmission equipment with low speed and high torque, internal combustion engines or other high speed power can achieve speed by clamping a large gear on the output shaft with a large gear on the gear on the gear input shaft of the reducer.Ordinary reducers also have several pairs of gears with the same principle to achieve ideal reduction results.The ratio of the number of teeth of the large and small gears is the transmission ratio.