Each servo planetary gearbox has a rated input speed and the number of planetary gears.Since only one set of planetary gears cannot satisfy a large transmission ratio, two or three sets of such gears are sometimes required to meet user requirements.That is, the greater the reduction ratio is, the more it is needed, the less efficient it is.
So, how to check the ramp frequency of TQG servo planetary reducer?
Fix the output end and rotate the input end clockwise and anti-clockwise, this will produce about +-2% of the rated torque of the torque, and there will be a slight angular displacement on the input end, called backlash.The unit is 'minute', which is one sixty-five one degrees.It is also known as return permit.Servo planetary gearboxes can be specified for input speeds up to 18000 rpm (depending on the size of the gearbox itself. The larger the reducer, the smaller the rated input speed)).The output torque of the industrial servo planetary gearbox usually does not exceed 2000nm, and the customized gearbox with super torque can reach the output torque of 10000nm.The operating temperature range is typically -25°C to 100°C.The operating temperature can be changed by changing the grease.
Therefore, the efficiency of the servo planetary gearbox is related to the number of stages of the reducer.
