We should all be familiar with the gear reducer. It has a wide range of applications, such as metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textiles, printing and dyeing, pharmaceuticals and other fields.But we are familiar with it, but there are not many people who know the sealing requirements of the gear reducer! But it doesn't matter, let me tell you about the density requirements of the gear reducer.
The gear reducer is usually installed in a place with poor environmental conditions. The service life of the compressor lubricating oil will be affected when the inhaled air contains particles, dust, and corrosive gases. It is recommended to consider installing an intake filter, and it should be cleaned and replaced regularly Air intake filter.
The seal of the gear reducer should pay attention to the following points:
1. No gaskets are allowed to be filled between the subdivided surfaces of the box, but sealant or water glass can be applied to ensure sealing;
2. When assembling, before tightening the bolts of the box body, a 0.05mm feeler gauge should be used to check the tightness between the joint surface of the box cover and the box seat;
3. The seal of the shaft extension should be coated with grease.All sealing devices should be installed strictly according to the requirements.
Then the above is the density requirement of the gear reducer, have you learned it! If you are interested in the gear reducer, or have other questions, please call us for consultation, we will serve you wholeheartedly.
